31 Aug 2017

gutter-unclog-graphic

LEAKING GUTTER SEALS
The most common problem that causes guttering to leak are seals that have perished. Most gutter joints, outlets etc will come with rubber seals to keep your guttering water tight and to allow for heat expansion.

To replace or repair seals you will need to:

  • Clean out any debris, dirt, moss or leaves from your guttering and pat dry with a towel. Make sure there are no blockages that could be attributing to the problem.
  • Carefully unclip the gutter bracket or joint that is leaking. If it is joined to the wall, carefully unscrew it.
  • Inspect the part you have removed. Check that there are no splits or holes in the joint itself and that the part is up to standard. To check the seal, remove it by peeling it away from the top. A flat head screwdriver or flat utensil may help in this instance.
  • Check the seal for damage or signs of wear. If there is a build-up of muck or grime you will need to clear this all away. If there are any cracks or chips in the seal you will need to replace it. If not, after a clean you can put it back.
  • Replace the seal if needed. Cut to the correct length and ensure it is pressed back in to the gutter part.
  • Ensure the gutter lines up with the bracket once you put it back.

 

gutter-unclog

CLOGGED GUTTERING

Over time your gutter may get clogged. After all your roof faces the elements and with rain fall will direct leaves and dirt in to your gutters. Obviously the best way to solve this is to clean your guttering at least twice a year and before and after particularly rainy seasons.

An even more efficient way to combat it is to prevent the accumulation of dirt in the first place, and there are a few ways to do this.

  • ‘Hedgehog’ style gutter guards. These gutter guards are the most densely-packed guard on the market that still allow for complete flow of water through the gutter. They trap all sorts of dirt, leaves and grime, thus preventing the need for unblocking gutter or drains. The best thing about gutter brushes is that they are easy to install and are an inexpensive solution.
  • PVC gutter grids are a great option because they are soft and non-abrasive so they won’t damage guttering like traditional metal grids, they also won’t rust. PVC gutter grids are clip in so like a gutter brush they require no expert knowledge to install.
  • To protect the downpipe and drains, you may consider a drain cover or balloon outlet.